17
4.4 Profile
Profile function can help you remember previously connected wireless networks.
You can Edit, Delete or Add profiles in this page (as shown in Figure 4-11) for your convenient
reconnection later on.
Figure 4-11 Profile
Choose - You can choose any one wireless network you want to connect to.
Profile Name - The name you give to your wireless network(s). By default, it's the same as
root SSID, but you can change it to any other names that you can easily remember and
distinguish.
Root SSID - the SSID (wireless network name) of your root device, a wireless router or AP.
MAC - The physical address of your root AP, also called BSSID.
Security Type - The security type of your root device.
Modify - You can Edit or Delete the profile(s).
Click Connect to connect the range extender to the wireless network that you have chosen in the
profile list.
Click Add to add a new profile to the list.
Click Delete All to delete all the information in the profile list.
To add a profile:
1. Click Add in the Profiles list page as shown in Figure 4-11.
2. Configure the required parameters (as shown in Figure 4-12), including name your profile, enter
the SSID of your root device (a wireless router or AP) and its MAC address, select the security
type of your root device and also enter the wireless password. Then click to Save your profile.
Figure 4-12 Add or Modify the Profile
To Next Page
Loading...
Need help?
General
Weight and Dimensions
