33
Click the Reboot button to reboot the device.
Some settings of the device will take effect only after rebooting, which include:
3) Change LAN IP Address (System will reboot automatically).
4) Change the Wireless configurations.
5) Change the Web Management Port.
6) Upgrade the firmware of the device (system will reboot automatically).
7) Restore the device's settings to factory defaults (system will reboot automatically).
8) Update the configuration with a file (system will reboot automatically).
4.8.5 Password
Selecting System Tools > Password allows you to change the factory default user name and
password of the device on the screen shown in Figure 4-33.
Figure 4-33 Password
It is strongly recommended that you change the factory default user name and password of the
device. All users who try to access the device's web-based management page or Quick Setup will
be prompted for the device's user name and password.
Note:
The new user name and password must not exceed 14 characters in length and must not include
any spaces. Enter the new Password twice to confirm it.
Click Save when finished.
Click Clear All to clear all.
4.8.6 System Log
Selecting System Tools > System Log allows you to query the Logs of the device on the screen
shown in Figure 4-34.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
