TP-Link TL-WPA8630P Manual

WAN LAN
TL-WPA8630P KIT
Hello, I’m here.
Follow me to extend your Wi-Fi network.
Powerline
1
Internet
Adapter TL-PA8010P Extender TL-WPA8630P
2
Plug the powerline devices into the wall sockets
near each other and on the same electrical circuit.
Connect the adapter to a LAN
port of your router using an
Ethernet cable.
* A red Powerline LED indicates poor signal strength, move the extender to another location.
Find the Wi-Fi Info Card in the package, and then relocate the powerline extender
to a new location. Connect to the Wi-Fi using the SSID and password on the card.
within 2 minutes
Tips:
You can add more powerline devices to the
existing powerline network by pairing these
devices.
* If the Power LED does not blink, press it again.
Press the Pair button for 1 second.
The Power LED starts blinking.
A.
Pair the powerline devices.
B.
Press the Pair button for 1 second.
The Power LED starts blinking.
When the Powerline LED is on
and stable, it’s done.
* Images in the QIG may differ from actual products.

TP-Link TL-WPA8630P Specifications

General

Modulation	OFDM
Power plug	Type F
Ethernet LAN	Yes
Wi-Fi standards	802.11a, Wi-Fi 5 (802.11ac), Wi-Fi 4 (802.11n)
PowerLine standard	HomePlug AV2
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Security algorithms	128-bit AES
Networking standards	IEEE 1901, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN (RJ-45) ports	3
Maximum data transfer rate	1300 Mbit/s
Maximum operating distance	300 m
Ethernet LAN interface type	Gigabit Ethernet
Power consumption (standby)	7 W
Power consumption (typical)	11 W
Product color	White
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Package type	Box
Quantity per pack	1 pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	75 mm
Width	42 mm
Height	152 mm