TP-Link TL-WPA8630P Quick Installation Guide

Existing Powerline Device
(for demonstration only)
* TL-WPA8630P (European version) is used for demonstration in this guide.
Pair the powerline devices.
4
3
Note: If the Powerline LED turns red, it means the signal
strength is poor. Try another wall outlet.
Relocate the extender to the Wi-Fi “dead” zone.
Connect your devices to the internet using the
default SSID (network name) and password on
the Wi-Fi Info Card provided.
Note: If the Power LED does not blink, press the Pair
button again.
Press the Pair button on the existing powerline
device for 1 second. The Power LED starts blinking.
A
Within 2 minutes, press the Pair button on the new
extender for 1 second. The Power LED starts blinking.
B
When the Powerline LED on the new extender turns
on, the pairing process is complete.
New Extender TL-WPA8630PExisting Powerline Device
Quick Installation Guide
TL-WPA8630P
Within 2 minutes
Powerline
Blinking
On
Attention
Wall Outlet Power Strip
Plug powerline devices into wall outlets instead of power strips.
Check the new extender’s Powerline LED . Is it on?
Step 4>
Step 3>
2
New Extender
TL-WPA8630P
1
Plug in the new extender near one of your existing powerline devices.
Blinking
If you cannot nd this SSID in your Wi-Fi network list, this may mean the Wi-Fi Move feature
has automatically copied over the existing wireless settings (see back for more information).
In this case, use the SSID and password of your existing powerline network to connect.
SSID: TP-Link_XXXX
SSID: TP-Link_XXXX_5G
Wireless Password: XXXXXXXX
TP-Link_XXXX
TP-Link_XXXX_5G

TP-Link TL-WPA8630P Specifications

General

Modulation	OFDM
Power plug	Type F
Ethernet LAN	Yes
Wi-Fi standards	802.11a, Wi-Fi 5 (802.11ac), Wi-Fi 4 (802.11n)
PowerLine standard	HomePlug AV2
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Security algorithms	128-bit AES
Networking standards	IEEE 1901, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN (RJ-45) ports	3
Maximum data transfer rate	1300 Mbit/s
Maximum operating distance	300 m
Ethernet LAN interface type	Gigabit Ethernet
Power consumption (standby)	7 W
Power consumption (typical)	11 W
Product color	White
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Package type	Box
Quantity per pack	1 pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	75 mm
Width	42 mm
Height	152 mm