TP-Link TL-WR740N - 150Mbps Wireless Lite N Router IEEE 802.11n 802.11g 802.11b Built-in User Manual

TL-WR740N/TL-WR741ND 150Mbps Wireless N Router
- 51 -
¾ Service Port - The numbers of External Ports. You can type a service port or a range of
service ports (in XXX – YYY format, XXX is the start port number, YYY is the end port
number).
¾ IP Address - The IP Address of the PC providing the service application.
¾ Protocol - The protocol used for this application, either TCP, UDP, or All (all protocols
supported by the Router).
¾ Status - The status of this entry, either Enabled or Disabled.
To setup a virtual server entry:
1. Click the Add New… button, the next screen will pop-up as shown in Figure 4-32.
2. Select the service port you want to use from the Common Service Port list. If the Common
Service Port list does not have the service that you want to use, type the service port
number or service port range in the Service Port box.
3. Type the IP Address of the computer in the IP Address box.
4. Select the protocol used for this application, either TCP, UDP, or All.
5. Select the Enable to enable the virtual server.
6. Click the Save button.
Figure 4-32 Add or Modify a Virtual Server Entry
)
Note:
If your computer or server has more than one type of available service, please select another
service, and enter the same IP Address for that computer or server.
To modify or delete an existing entry:
1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the
Delete.
2. Modify the information.

TP-Link TL-WR740N - 150Mbps Wireless Lite N Router IEEE 802.11n 802.11g 802.11b Built-in Specifications

General

Wireless Standards	IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
Frequency	2.4-2.4835GHz
Antenna	5dBi fixed omni directional antenna
Button	Reset Button
Operating Temperature	0°C~40°C (32°F~104°F)
Storage Temperature	-40°C~70°C (-40°F~158°F)
Operating Humidity	10%~90% non-condensing
Storage Humidity	5%~90% non-condensing
Signal Rate	11n: Up to 150Mbps(dynamic), 11g: Up to 54Mbps(dynamic), 11b: Up to 11Mbps(dynamic)
Ports	4 x 10/100Mbps LAN, 1 x 10/100Mbps WAN
Power Supply	9VDC / 0.6A
Wireless Security	64/128-bit WEP, WPA / WPA2, WPA-PSK / WPA2-PSK
Weight	0.3 kg

Summary

FCC Statement

FCC Statement

Details FCC compliance, interference, and operational conditions for the device.

Chapter 1. Introduction

Overview of the Router

Introduces the router, its integrated components, and high-level features like speed and security.

Main Features

Details features like 150Mbps wireless, RJ45 ports, security protocols, and network access types.

Panel Layout

The Front Panel

Details the LEDs on the front panel and their indications for the router's status.

The Rear Panel

Identifies and explains the function of rear panel components like antenna, power, ports, and reset.

Chapter 2. Connecting the Router

System Requirements

Lists the necessary hardware and software requirements for setting up the router.

Connecting the Router

Provides step-by-step instructions for physically connecting the router to the modem and PCs.

Chapter 3. Quick Installation Guide

TCP/IP Configuration

Explains how to configure the PC's TCP/IP settings for router communication.

Quick Installation Guide

Guides users through accessing the router's web utility and performing initial configuration.

Quick Setup – Wireless

Guides on setting up wireless parameters such as SSID, region, channel, mode, and security.

Chapter 4. Configuring the Router

Login

Explains how to access and log into the router's web-based configuration utility.

WAN Settings

Explains how to configure WAN connection types like Dynamic IP and Static IP.

Wireless Settings

Details how to configure basic wireless network settings like SSID and channel.

Wireless Security

Explains how to configure various wireless security modes, including WEP, WPA, and WPA2-PSK.

DHCP Configuration

DHCP Settings

Details how to configure the DHCP server, IP address range, and lease time.

Address Reservation

Explains how to reserve IP addresses for specific devices using their MAC addresses.

Port Forwarding

Virtual Servers

Guides on setting up Virtual Servers to expose LAN services to the Internet.

Port Triggering

Explains how to configure port triggering for applications requiring multiple connections.

Security Settings

Basic Security

Details basic security settings including firewall, VPN passthrough, and ALG options.

Advanced Security

Explains advanced security features to protect against DoS attacks like SYN Flood.

Local Management

Describes how to configure local management rules, restricting access by MAC address.

Remote Management

Explains how to enable and configure remote management of the router via the internet.

Parental Control

Parental Control Settings

Details how to set up parental controls to manage children's internet access and time.

Access Control

Rule Management

Explains how to create and manage internet access control rules for hosts and targets.

Host Settings

Details how to add and manage hosts (by IP or MAC address) for access control rules.

System Tools

Diagnostic Tools

Guides on using diagnostic tools like Ping and Traceroute to check network connectivity.

Firmware Upgrade

Explains how to download and install the latest firmware for the router.

Factory Defaults

Guides on restoring the router's configuration to its original factory default settings.

Password Management

Guides on changing the router's default user name and password for security.

Appendix B: Configuring the PC

Configure TCP/IP Component

Guides on configuring TCP/IP components in Windows XP for network setup.

Appendix C: Specifications

Wireless Specifications

Details wireless specifications like frequency band, data rate, modulation, and security.