10
18-EB32D1-1E-EN
II mmppoorrttaanntt:: A minimum 0" clearance to combustible
material shall be maintained on air outlet
duct.
11. Exhaust vents or other sources of contaminated air
should not be near the unit’s air inlet if outside air is
to be introduced as make-up air or a ventilation
feature is to be used. Contamination from exhaust
vents or chimneys may also foul the condenser
causing degraded performance.
12. Check the handling facilities to ensure the safety of
personnel and the unit(s).
SStteepp33––LLooccaattiioonnaannddRReeccoommmmeennddaattiioonnIInnffoorrmmaattiioonn
To Next Page
Loading...
Need help?
General
