2
About the Manual
Literature Change History
SENS-IN-1A September 1997
Original Installation manual for mounting, wiring and pro-
gramming the Programmable Zone Sensor.
SENS-IN-1B March 1998
Updated Programmable Zone Sensor Installation manual
due to zone sensor redesign.
SENS-IN-1C February 2000
Updated Programmable Zone Sensor Installation manual
due to internal Sensor changes and to clarify programming
instructions.
Overview of Manual
Note: One copy of this document ships inside each
Programmable Zone Sensor kit and is customer
property. The unit’s maintenance personnel must
retain it.
This booklet describes step-by-step instructions for install-
ing and programming the Programmable Zone Sensor.
By carefully reviewing the information within this manual
and following the instructions, the risk of improper operation
and/or component damage will be minimized.
Should equipment failure occur, contact a qualified service
organization with qualified, experienced HVAC technicians
to properly diagnose and repair this equipment.
Note: The procedures discussed in this manual
should only be performed by qualified, experienced
HVAC technicians.
To Next Page
Loading...
Need help?
General
