BASIC
PROCEDURES:
T
EMPERATURE
•To check the outdoor temperature,
press OUTDOOR TEMP. The outdoor
temperature ranges from -20°F to
120°F. (Note: If the outdoor sensor
is not installed, the outdoor tempera-
ture displayed on the thermostat will
be -13°F or below) Press OUTDOOR
TEMP again or EXIT to return to the
normal LCD display. Or wait a minute,
and the normal LCD display will return
on its own.
•Setpoints are the heating and cooling
temperatures you prefer. Press either
ARROW once to see the setpoint of the
current mode (cooling or heating). They
are displayed by the set of flashing
numbers on the left, next to the words
Set Pt. The actual indoor temperature
is indicated on the right. Press the
HEAT/COOL button to toggle between
heating and cooling setpoints. Press
EXIT when you’ve seen enough.
To change setpoints temporarily, see
pages 10 – 12.
A Matter Of Degrees.
8
To Next Page
Loading...
Need help?
General
