General Information
44
Trip Meter
Warning
Do not attempt to switch between
the odometer and trip meter display
modes or reset the trip meter with the
motorcycle in motion as this may lead
to loss of motorcycle control and an
accident.
10
20
110
120
120
0
0
20
40
60
180
200
1. Trip meter display (Trip 1 selected)
There are two trip meters. Either trip
meter shows the distance that the
motorcycle has traveled since the meter
on display was last reset to zero.
To switch between trip meters, press
and release the SCROLL button, located
on the left hand handlebar switch
housing, until the desired trip meter is
shown.
1. SCROLL button
Note
Street Scrambler Only
The trip meters are not accessible when
in OFF ROAD mode. The trip meter data
continues to be collected when riding in
OFF ROAD mode. The updated trip meter
data is shown in the trip meters after
switching the OFF ROAD mode off.
Trip Meter Reset
To reset either of the trip meters, select
and display the trip meter to be zeroed.
Then press and hold the SCROLL button
for one second. After more than one
second, the trip meter on display will
reset to zero.
To Next Page
Loading...
Need help?
General
