General Information
58
Hazard Warning Lights
To turn the hazard warning lights on
or off, press and release the hazard
warning light switch.
The ignition must be switched ON for
the hazard warning lights to function.
The hazard warning lights will remain on
if the ignition is switched off, until the
hazard warning light switch is pressed
again.
Left Handlebar Switches
1. SCROLL button
2. Horn button
3. Turn signal switch
4. MODE button (Speed Twin,
Street Scrambler, Street Twin and
Thruxton R only)
5. Daytime Running Lights (DRL) switch
(if equipped)
6. High beam button
SCROLL Button
The SCROLL button is used to
operate the following functions of the
instruments:
• Odometer functions (see page 44)
• Trip reset (see page 44)
• Clock reset (see page 45)
• Traction control functions (see
page 49).
Horn Button
When the horn button is pushed, with
the ignition switch turned on, the horn
will sound.
Turn Signal Switch
When the turn signal switch is pushed
to the left or right, the corresponding
turn signals will flash on and off.
To Next Page
Loading...
Need help?
General
