Maintenance and Adjustment
142
Speed Twin, Thruxton and
Thruxton R
To install the battery:
• Place the battery in the battery
case.
• Secure with the battery strap and
make sure the USB port socket is
re-installed.
• Reconnect the battery, positive lead
(identified with red tape) first.
• Tighten the battery terminals to
40 lbf in (4.5 Nm).
• Apply a light coat of grease to the
terminals to prevent corrosion.
• Cover the positive terminal with the
protective cap.
• Reinstall the seat (see page 72).
Fuses
Warning
Always replace blown fuses with new
ones of the correct rating (as specified
on the fuse box cover) and never use a
fuse of higher rating.
Use of an incorrect fuse could lead
to an electrical problem, resulting in
motorcycle damage, loss of motorcycle
control and an accident.
Note
A blown fuse is indicated when all of the
systems protected by that fuse become
inoperative. When checking for a blown
fuse, use the table to establish which
fuse has blown.
The fuse box is located underneath the
seat.
To Next Page
Loading...
Need help?
General
