Triumph BONNEVILLE User Manual

Maintenance and Adjustment
64
* Evaporative system fitted to models for certain markets only.
Brake pads - check wear levels Day
•••••
Brake master cylinders - check for fluid leaks -
•••••
Brake calipers, check for fluid leaks and seized pistons -
•••••
Drive chain - lubricate Every 200 miles (300 kms)
Drive chain - wear check Every 500 miles (800 kms)
Drive chain slack - check/adjust Day
•••••
Drive chain rubbing strip - check
••••
Fasteners - inspect visually for security Day
•••••
Wheels - inspect for damage Day
•••••
Spokes (where fitted) - check wheels for broken or
damaged spokes/check spoke tightness
Day
•••••
Wheel bearings - check for wear/smooth operation -
•••••
Tire wear/tire damage - check Day
•••••
Tire pressures - check/adjust Day
•••••
Clutch cable - check/adjust Day
•••••
Stand - check operation Day
•••••
Secondary air injection system - check/clean -
••
Fuel and evaporative* hoses - replace -
•
Operation Description Odometer Reading in Miles (Kms) or Time Period,
whichever comes first
First Service A Service B ServiceC ServiceD service
Every 500
(800)
1 month
6,000
(10,000)
1 year
12 , 0 00
(20,000)
2 years
18,000
(30,000)
3 years
24,000
(40,000)
4 years

Triumph BONNEVILLE Specifications

General

Fuel System	Multipoint sequential electronic fuel injection
Gearbox	5-speed
Rear Tyre	150/70 R17
Final Drive	Chain
Clutch	Wet, multi-plate
Frame	Tubular steel cradle
Front Suspension	41mm forks
Front Brakes	Single 310mm disc, 2-piston caliper
Rear Brakes	Single 255mm disc, 2-piston caliper
Rear Wheel	Wire-spoked, 17-inch
Front Tyre	100/90-1
Fuel Tank Capacity	14.5 L (3.8 US gal)
Bore x Stroke	84.6 x 80 mm