EasyManuals Logo
Home>Triumph>Security System>Protect+

Triumph Protect+ User Manual

Triumph Protect+
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Protect+ User Guide
1 of 9
Publication part number 9901719 issue 3
© Triumph Designs Ltd. 2021
English
The Triumph Protect+ is an alarm system designed specifically to complement the original equipment
immobiliser system on your Triumph motorcycle. The Triumph Protect+ is purely an alarm, the immobilisation
functionality is handled by the motorcycle ignition system.
When armed the Triumph Protect+ monitors your motorcycle for signs of unauthorised movement by use of
a movement sensor, unauthorised ignition operation and unauthorised access to the alarm control unit as
well as battery removal. If any of these conditions are detected the alarm siren will sound and the motorcycle
indicators will flash except if the motorcycle battery has been disconnected, where the siren will still sound
thanks to an internal rechargeable battery in the Triumph Protect+, but the motorcycle indicators will not
flash. The siren will operate for 29 seconds, then re-arm. This will be repeated 10 times if an alarm trigger
remains. After the activation cycle has been repeated 10 times the siren will no longer sound until the next
alarm arm/disarm.
This security system is designed as a deterrent and is not in itself a guarantee against theft. We advise you
that the more difficult you make your machine to be stolen, the lower the potential theft risk.
Applying common sense and securing your machine with additional security every time you park plays a
large part in this. Visit www.triumphmotorcycles.com for Triumph security products.
Please retain this user guide for future reference.
The information contained in this publication is accurate at the time of final approval, however, Triumph
Motorcycles reserves the right to amend the information at any time without notice.
Insurance Approval
The Triumph Protect+ is approved in the UK as a Thatcham Category 2:1 upgrade alarm, designed to be
installed on Triumph motorcycles equipped as standard with the Triumph immobiliser system.
When installed to the correct specification motorcycle, the Triumph Protect+ upgrades the motorcycle
approval to full Thatcham Category 1 status.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Triumph Protect+ and is the answer not in the manual?

Triumph Protect+ Specifications

General IconGeneral
BrandTriumph
ModelProtect+
CategorySecurity System
LanguageEnglish