MAINTENANCE
141
To adjust the rear brake fluid level:
▼ Loosen the reservoir cap and remove
the diaphragm seal.
▼ Fill the reservoir to the upper level
line using new DOT 4 brake fluid from
a sealed container.
▼ Re-install the reservoir cap making
sure that the diaphragm seal is
correctly installed.
Brake Light Switches
Warning
Riding the motorcycle with defective
brake lights is illegal and dangerous.
An accident causing injury to the rider
and other road users may result from
use of a motorcycle with defective
brake lights.
The brake light is activated
independently by either the front or
rear brake. If, with the ignition in the ON
position, the brake light does not work
when the front brake lever is pulled or
the rear brake pedal is pressed, have
your authorized Triumph dealer
investigate and rectify the fault.
To Next Page
Loading...
Need help?
General
