19
MAINTENANCE
CLEANING
Lubrication of all moving parts is essential to the longevity and optimal performance of your Trojan Apex 100
Stationary Bike.
Note: Do not use oil based lubricants as they will attract dust, dirt and grime, and will eventually gum up and
erode bushings and sealed bearings.
All bushings should be checked regularly for signs of wear. Check and adjust cable tension periodically as it
will maintain proper anatomical function. Periodically check all moving parts, upholstery and grips for signs of
wear or damage. If there is a problem or replacement part which is necessary, STOP USING THE EQUIPMENT
and immediately contact your local retailer. Replace parts using only genuine parts.
As needed, upholstery may be cleaned with a mild solution of soap and water. Regular use of a vinyl
treatment will add to the life and appearance of your upholstery.
All chrome plated surfaces should be cleaned regularly to prolong the life and luster of the nish. Wipe
machine down with a damp cloth and dry thoroughly each day. At least once a week your chrome equipment
should be polished with a commercial grade or automotive type chrome polish.
When checking the bolts and nuts, be sure they are all fully fastened. If there is a bolt or nut that
continuously loosens obtain a Trojan replacement. Check welds to be free of cracks.
Failure to perform routine maintenance could result in personal injury and/or equipment damage.
STORAGE
Store the Trojan Apex 100 Stationary Bike in a clean and dry environment away from children.
#19M05T013 Apex 100 Bike UM V2.indd 19 15/07/2019 14:05
To Next Page
Loading...
Need help?
General
