9. Apply detergent to a dry surface, starting at lower
portion of areato bewashed andwork upward, using
long, even, overlapping strokes.
10. Allow detergent to "soak in" for 3-5 minutes before
washing and rinsing. Reapplyas neededto prevent
surfacefrom drying. DO NOTallow detergentto dry on
(prevents streaking).
Pressure WasherRinsing
ForRinsing:
1. Turn detergent shut-off valveto "Off" position.
2. Remove black spray tip from nozzleextension.
3. Select and install desired high pressure spray tip
following instructions How to UseSpray Tips.
4. Keepspray gun a safe distance from areayou plan to
spray.
_i, WARNING Kickbackfrom spray gun cancauseyou to
fall.
• Operatepressurewasherfrom astablesurface.
• Beextremelycarefulif you mustusethe pressurewasherfrom
a ladder,scaffolding,or anyothersimilarlocation.
• Firmlygraspspraygunwith bothhandswhen usinghigh
pressuresprayto avoidinjurywhenspraygunkicksback.
5. Applya high pressuresprayto asmall areaandthen
checksurfacefor damage.If no damage is found, you
canassume it isokay to continue rinsing.
6. Start attop of areato be rinsed,working down with same
overlappingstrokesas you usedfor cleaning.
AutomaticCool DownSystem(ThermalRelief)
If you run the engineon your pressure washer for
3-5 minutes without pressing the trigger on the spray gun,
circulating water in the pump can reachtemperatures above
125°F (51°C).The system engagesto cool the pump by
dischargingthe warm water ontothe ground.
15
To Next Page
Loading...
