True Induction TI-1B User Manual

11
SINGLE BURNER INDUCTION COOKTOP MANUAL 8.15.2023 Verison 1.0.01 P.9
Internal circuit error. Contact manufacturer
Top plate over heat. Please turn off the cooktop to let it cool down.
No cookware found or improper placement of cookware on cooking
zone. Ensure . cookware is centered on cooking zone and that it's
induction compatible -see COMPTIBLE COOKWARE
IGBT (insulated Gate Bipolor Transistor) overheating. Turn off the unit to
allow IGBT to cool Restart unit once cooled.
Supplied voltage to cooktop is too high. This may occur when there is an
increase in voltage supplied to the house circuit. Once the supplied
voltage returns to normal, the code will disappear.
Supplied voltage to cooktop is too low. This may occur when there is an
increase in voltage supplied to the house circuit. Once the supplied
voltage returns to normal, the code will disappear.
Top plate sensor open/short circuit. Turn OFF the cooktop: then shut off
power at the circuit breaker for 30 secs. Turn the power on and press
POWER button to the unit. If error message persists, call for service.
IGBT sensor open circuit/short circuit. Turn OFF the cooktop: then shut
off power at the circuit breaker for 30 secs. Turn the power on and press
POWER button to the unit. If error message persists, call for service.
Error Code
E1
E2
E3
E4
E5
E6
E7
- - -
Cause and Potential Solution

True Induction TI-1B Specifications

General

Brand	True Induction
Model	TI-1B
Category	Cooktop
Language	English