CS800/LC900 Bike
CS800, LC900 Bike Self Generating
(Electromagnetic Brake) LCD 2 Window
Press the CLEAR ENTRY button until the display blinks then
immediately press and hold the ENTER button until ENTER
PASSCODE appears.
Press 20173 then ENTER. The word Production Test will appear.
Pressing the enter button will scroll through a menu of items and
are as follows.
EPROM Test. (Shows SW Version)
Key Test (Test Keys)
Display Test (Test Display)
Control Test (Not Used By Service)
HR Test (Check Polar/Contact)
Vart Test (Not Used By Service)
A/D Channels (Not Used By Service)
Brake Pedal RPM (RPM Read from brake voltage)
Watch Dog Test (Exits Production Test)
BV Set Up (Program Entertainment) See Instructions.
To Next Page
Loading...
Need help?
General
