TSC DA210 Series User Manual

22
4.7 Loading Media in Linerless Cutter Mode (Optional for DA220 series)
1. Open the printer cover.
2. Separate the media
holders to the label width.
3. Place the label leading
edge onto the platen roller
ensuring that the print side
faces up.
4. Close the top cover gently.
Use software to make
calibration. You may refer
to Chapter 4 and 5 for
configuring the printer.

TSC DA210 Series Specifications

General

Brand	TSC
Model	DA210 Series
Category	Barcode Reader
Language	English