TSC DA210 Series User Manual

40
IS 13252(Part 1)/
IEC 60950-1
UL 60950-1(2nd Edition)
CSA C22.2 No. 60950-1-07(2nd Edition)
Energy Star for Imaging Equipment Version 3.2
TP TC 004/2011
TP TC 020/2011
LP0002
Note: There may have certification differences in the series models, please refer to product label for accuracy.
Important safety instructions:
1. Read all of these instructions and keep them for later use.
2. Follow all warnings and instructions on the product.
3. Disconnect the power plug from the AC outlet before cleaning or if fault happened.
Do not use liquid or aerosol cleaners. Using a damp cloth is suitable for cleaning.
4. The mains socket shall be installed near the equipment and easily accessible.
5. The unit must be protected against moisture.
6. Ensure the stability when installing the device, Tipping or dropping could cause damage.
7. Make sure to follow the correct power rating and power type indicated on marking label
provided by manufacture.
8. Please refer to user manual for maximum operation ambient temperature.
WARNING:
Hazardous moving parts, keep fingers and other body parts away.

TSC DA210 Series Specifications

General

Brand	TSC
Model	DA210 Series
Category	Barcode Reader
Language	English