TSC PEX-1120 Series User Manual

25
25
PEX-1000 Series
Print
Engine Service Manual
3.10 Replacing the Stepping Motor Assembly
1. Follow the previous step (refer to section 3.3, 3.4 and 3.5) to remove the electronics cover, power
supply unit and interface unit.
2. Remove four screws and one connector on the stepping motor assembly.
3. Remove/Replace the stepping motor assembly (including belt, gears, stepping motor)
4. Reassemble the parts in the reverse procedures.

TSC PEX-1120 Series Specifications

General

Brand	TSC
Model	PEX-1120 Series
Category	Printer
Language	English