TSC PEX-1120 Series User Manual

19
19
PEX-1000 Series
Print
Engine Service Manual
3.6 Replacing the Main Board
1. Refer to section 3.3 & 3.5 to remove the electronics cover and multi-interface board first.
2. Remove two copper pillars, four screws on the main board.
3. Remove two screws to loosen the serial port.
4. Remove/Replace the main board.
5. Reassemble the parts in the reverse procedures.
Copper
pillars
Screws

TSC PEX-1120 Series Specifications

General

Brand	TSC
Model	PEX-1120 Series
Category	Printer
Language	English