TSC Printronix MB340 User Manual

57
Date & Time
Setup the date and time on display.
N/A
Security
Set the password for locking the menu or favorites. The default password is 8888.
Disable
Cutter Type
Set the cutter type.
Guillotine
Ribbon Low Warning
Set the warning for ribbon low. For example, if setting value is 30m, when ribbon
capacity was lower than 30m, the will be shown in red.
30M
Print Head Maintain
Check printhead status and to set the settings for printhead care.
Warning: Enable/disable the printhead maintenance warning. If enable this feature,
once printhead has been reached the setting mileage then the warning icon will be
shown on printer UI for reminding user to clean the printhead. The default setting is
disable.
Reset Counter: Reset the printhead clean warning mileage after cleaning printhead.
Interval: This item is used to set the expected mileage for reminding user to clean the
printhead. You have to enable the “TPH warning lock” for use. The default setting is 1
km.
Key sound: This item is used to enable/disable the sound of front panel buttons.
N/A

TSC Printronix MB340 Specifications

General

Brand	TSC
Model	Printronix MB340
Category	Barcode Reader
Language	English