Sets how often the linerless cutter blade should be cleaned.
Warning: Turns on/off notification that reminds users to clean the cutter blade if the
set mileage for the cutter blade is fulfilled. Default setting: ON.
Interval: Sets mileage for the cutter blade. When the set amount of mileage is
fulfilled, the warning icon that reminds users to clean the cutter blade will appear on
the display panel. Default setting: 1 km.
Clean Cutter Blade: Lifts up to expose the cutter blade. Select this item to lift up the
cutter blade if you need to clean the blade.
NOTE: For how to clean the linerless cutter blade, please refer to 8.2 Cleaning the
Printer after Linerless Printing for more information.
CAUTION: To avoid the risk of personal injury, keep your hands away from the cutter
gate when selecting Clean Cutter Blade. Selecting this item will lift up the blade.
Reset Counter: Resets the mileage count after cleaning the cutter blade.
To Next Page
Loading...
Need help?
General
