TSC TA210 User Manual

TA210/ TA310/ TA200/ TA300
Bar Code Printer Service Manual
28
Poor Print Quality
* Ribbon and media is loaded
incorrectly
* Dust or adhesive accumulation on
the print head.
* Print density is not set properly.
* Printhead element is damaged.
* Ribbon and media are incompatible.
* The printhead pressure is not set
properly.
* Reload the supply.
* Clean the print head.
* Clean the platen roller.
* Adjust the print density and print speed.
* Run printer self-test and check the print
head test pattern if there is dot missing in
the pattern.
* Change proper ribbon or proper label
media.
* The print head mechanism does not latch
the print head properly.
Power indicator does
not illuminate
The power cord is not properly
connected.
Plug the power cord in printer and outlet.
Switch the printer on.
- The printer status from
DiagTool shows “Head
Open”.
- The LCD shows
“Carriage Open”.
The printer carriage is open.
Please close the print carriage.
- The printer status from
DiagTool shows “Ribbon
End Err.” Or “Ribbon
Encoder Err.”
- The LCD shows “No
Ribbon”.
Running out of ribbon.
Supply a new ribbon roll.
The ribbon is installed incorrectly.
Please re-install the ribbon.
- The printer status from
DiagTool shows “Out of
Paper”.
- The LCD shows “No
Paper”.
Running out of label.
Supply a new label roll.
The label is installed incorrectly.
Please reinstall the label roll.
Gap/black mark sensor is not
calibrated.
Calibrate the gap/black mark sensor.
- The LCD shows “Take
Label”.
* Peel-off function is enabled.
* If the peel-off module is installed, please
remove the label.
* If there is no peel-off module in front of the
printer, please switch off the printer and
install it.
* Check if the connector is plugging
correctly.
Memory full
( FLASH / DRAM )
* The space of FLASH/DRAM is full.
* Delete unused files in the FLASH/DRAM.
* The max. numbers of DRAM is 256 files.
* The max. user addressable memory
space of DRAM is 256KB.
* The max. numbers of file of FLASH is 256
files.
* The max. user addressable memory
space of FLASH is 2560KB.

TSC TA210 Specifications

General

Brand	TSC
Model	TA210
Category	Printer
Language	English