1.3 Rear View
1. Power jack socket
2. *microSD card slot (Option)
3. Internal Ethernet interface (Option)
4. RS-232C interface (Option)
5. USB interface (USB 2.0/ Full speed mode)
6. Centronics interface (Option)
7. Rear external label entrance chute
Note:
The interface picture here is for reference only. Please refer to the product
specification for the interfaces availability.
* Recommended SD card specification.
- The DOS FAT file system is supported for the SD card.
- Folders/files stored in the SD card should be in the 8.3 filename format.
To Next Page
Loading...
Need help?
General
