TSC TDP-225 Series User Manual

7
3.2 Loading the Media
1. Open the printer top cover by pulling the tabs
located on each side towards the front of the printer,
and then lift the top cover to the maximum open
angle.
TDP-225/324
TDP-225W/324W
2. The media holder can be used for 1” and 1.5” media
core by rotating the upper part of label holder 180
degrees clockwise. (For TDP-225/324 model only)
3. Separate the media holders to the label roll width.
1”
1.5”

TSC TDP-225 Series Specifications

General

Brand	TSC
Model	TDP-225 Series
Category	Barcode Reader
Language	English