TSC TDP-225 Series User Manual

1
1. Introduction
Thank you very much for purchasing TSC bar code printer.
TDP-225 Series provides direct thermal printing at user selectable speed of: 2.0, 3.0, 4.0, 5.0, 6.0 ips for 203 dpi; 2.0, 3.0 or 4.0 ips
for 300 dpi. It accepts roll feed, die-cut, and fan-fold media with gap or black mark. All common bar codes formats are available.
Fonts and bar codes can be printed in 4 directions, 8 different alphanumeric bitmap fonts and built-in scalable font capability. You
will enjoy trouble free, high throughput for printing labels with this printer.
This document provides an easy reference for operating the TDP-225 series printer. TSC printers include the Windows labeling
software for creating your label template. For system integration, the TSPL/TSPL2 printer programming manual or SDKs can be
found on TSC website at: https://www.tscprinters.com.

TSC TDP-225 Series Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Resolution	203 DPI
Memory	8 MB Flash
Processor	32-bit RISC
Interface	USB 2.0
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-40°F to 140°F (-20°C to 60°C)
Label Width	60 mm (2.36")