TSC TTP-268M User Manual

23
2.6.4 Loading Media in Cutter Mode (Option)
1. Install the label. (Please refer to chapter 2.6.1)
2. Lead the media through the cutter paper opening.
3. Adjust the label guide to fit the width of the label.
4. Close the print head mechanism making sure the latches are engaged properly.
5. Using the front display panel, set the printer setting to cutter mode. Press the
FEED button to test.
Note:
Please calibrate the gap/black mark sensor when changing media.

TSC TTP-268M Specifications

General

Brand	TSC
Model	TTP-268M
Category	Barcode Reader
Language	English