TSC TTP-268M User Manual

53
3.1.4 Ethernet
Use this menu to configure internal Ethernet configuration check the printer’s Ethernet
module status, and reset the Ethernet module. This function is available on the LCD
display when Ethernet card is installed.
Press and buttons to select the different options and press
button to enter the option. Press key to cancel the setting and return to the
previous menu.
Exit
Ethernet
Status
Configure
↓
↓
IP Address
DHCP
↓
↓
MAC
Static IP
↓
↓
Exit
Exit
3.1.4.1 Status: (IP Address / MAC)
Use this menu to check the Ethernet setting status.
3.1.4.1.1 IP Address
Ethernet 1/3
>
Status
Configure
Exit
The IP address information will be shown on the LCD display. Please press
or button to return to the previous menu.
Status 1/3
>
IP Address
MAC
Exit
IP Address
0.0.0.0
Subnet Mask
0.0.0.0
Gateway
0.0.0.0

TSC TTP-268M Specifications

General

Brand	TSC
Model	TTP-268M
Category	Barcode Reader
Language	English