TSC XP-DT425B Series User Manual

4.4 Skip AUTO.BAS
TSPL2 programming language allows user to download an auto execution file to flash
memory. Printer will run the AUTO.BAS program immediately when turning on printer
power. The AUTO.BAS program can be interrupted without running the program by the
power-on utility.
Please follow the steps as below.
1. Turn off printer power.
2. Press the FEED button and then turn on power.
3. Release the FEED button when LED becomes solid blue.

The LED color will be changed as following:
Blue red (5 blinks) purple (5 blinks) blue (5 blinks) solid blue
4. Printer will be interrupted to run the AUTO.BAS program.
28

TSC XP-DT425B Series Specifications

General

Brand	TSC
Model	XP-DT425B Series
Category	Barcode Reader
Language	English