25
1 Accuracy stated at standard conditions of 21.1°C and 101.3 kPa.
• Add an additional 0.075% of reading per 1°C away from standard conditions
when operating within the range of 0°C to 50°C.
• Add an additional 0.015% of reading per 1 kPa above 101.3 kPa when pressure
compensated and operating within the pressure range of 70 kPa to 170 kPa.
• Add an additional 0.022% of reading per 1 kPa below 101.3 kPa when pressure
compensated and operating within the pressure range of 70 kPa to 170 kPa.
2 Accuracy stated with gas temperature and flow body temperature within ±10°C of
one another.
3 Accuracy stated measuring dry gas (less than 10% R.H.). Consult factory if % RH
> 10%
4 Includes ±0.5% of reading repeatability.
5 Volumetric flow rate (L/min) is calculated from the mass flow measurement (Std
L/min). The accuracy of the volumetric flow rate depends in part on the flow tube
pressure reading that is supplied to the device or assumed by the device. Consult
factory for more information.
6 Add 1mV additional uncertainty for analog output. Note that the analog output can
be rescaled to reduce the effect of this error
Specifications subject to change without notice.
To Next Page
Loading...
Need help?
General
