000000 NEO-M8L - Hardware integration manual
UBX-16010549 - R08 Document information Page 2 of 28
Early Production Information
Document information
u-blox M8 automotive dead reckoning modules including 3D sensors
Hardware integration manual
Early Production Information
Corresponding content status
In Development /
Prototype
Target values. Revised and supplementary data will be published later.
Data based on early testing. Revised and supplementary data will be published later.
Early Production Information
Data from product verification. Revised and supplementary data may be published later.
Mass Production /
End of Life
Document contains the final product specification.
This document applies to the following products:
u-blox or third parties may hold intellectual property rights in the products, names, logos and designs included in this
document. Copying, reproduction, modification or disclosure to third parties of this document or any part thereof is only
permitted with the express written permission of u-blox.
The information contained herein is provided “as is” and u-blox assumes no liability for its use. No warranty, either express or
implied, is given, including but not limited to, with respect to the accuracy, correctness, reliability and fitness for a particular
purpose of the information. This document may be revised by u-blox at any time without notice. For the most recent
documents, visit www.u-blox.com.
Copyright © u-blox AG.
To Next Page
Loading...
Need help?
General
