21
3. Turn the adjusting screw toward the minus (–) sign (clockwise) for
smaller cubes or toward the plus (+) sign (counterclockwise) for
larger cubes.
4. Install the ice maker assembly cover.
MAINTENANCE
Periodic cleaning and proper maintenance will ensure efficiency, top
performance, and long life. The maintenance intervals listed are based
on normal conditions. You may want to shorten the intervals if you have
pets, the unit is used outdoors, or other special considerations.
EXTERIOR CLEANING — AS REQUIRED
The door, grille and cabinet may be cleaned with a mild detergent and
warm water solution. Do not use solvent based or abrasive cleaners.
Use a soft sponge and rinse with clean water. Wipe with a soft, clean
towel to prevent water spotting.
Stainless Steel Models
• Stainless steel models may discolor when exposed to chlorine gas,
pool chemicals, salt water or cleaners with bleach.
• Keep your stainless unit looking new by cleaning with a high quality,
all-in-one stainless steel cleaner/polish on a monthly basis. For best
results use Claire Stainless Steel Polish and Cleaner, which can be
purchased from U-Line Corporation. (Part number 173348/$7.99
plus shipping and handling.) Frequent cleaning will remove surface
contamination that could lead to rust. Some installations will require
cleaning on a weekly basis.
• DO NOT CLEAN WITH STEEL WOOL PADS.
• DO NOT USE CLEANERS THAT ARE NOT SPECIFICALLY
INTENDED FOR STAINLESS STEEL (this includes glass, tile
and counter cleansers).
• If any surface discolors or rusting appears, clean it quickly with Bon-
Ami or Barkeepers Friend Cleanser and a non-abrasive cloth. Always
clean in the direction of the grain. Always finish this process with
Claire Stainless Steel Polish and Cleaner to prevent further prob-
lems.
To Next Page
Loading...
Need help?
General
