U-Line Echelon 2075R User Manual

28
User’s Manual
Figure 33
Remove the control knob by grasping the knob and pulling straight off
(see Figure 33).
STORAGE
If the unit is to be stored or not used for extended periods, it will be
necessary to drain the system of water.
1. Shut off water supply at the main water source.
2. Disconnect the water supply line from the solenoid valve.
3. Disconnect the water line from the solenoid valve outlet.
4. Allow the unit to run for an hour or more until all remaining ice
cubes have been ejected from the ice maker assembly.
5. Dry out excess water from the ice maker assembly.
6. Prop the door open at least two inches to allow for air circulation
and prevent mold and mildew.
7. Disconnect unit from main electrical power source.
8. Leave water supply line and power cord disconnected until ready
to reuse.
NOTE
The use of anti-freeze or other products of this nature is not
necessary and is not recommended.
UL317
O
F
F
O
N
1
2
3
4
5
6
7
C
O
L
D
E
R
W
A
R
M
E
R
CONDENSER
30-10007_Body_UM.qxd 3/21/05 1:25 PM Page 28

U-Line Echelon 2075R Specifications

General

Brand	U-Line
Model	Echelon 2075R
Category	Refrigerator
Language	English