76
02
ABOUT
YOUR BIKE
All you need to know about the technical side of the 2×2 is
outlined in this section. We advise that you make yourself
familiar with this information before assembling the bike.
Technical Specifications
DIMENSIONS
Height* / Length* / Width 1050mm / 1820mm / 800mm (handlebars)
Wheel base 1,200mm
Seat height 800mm
Curb weight 58kg
Carrying capacity 150kg including rider
Equivalent fuel economy 0.32 l/100km
Typical cost to recharge 88¢
ELECTRICAL SYSTEM
Motor Two 1kW peak air-cooled, high
eciency, brushless motors
Controller High power density controller; Eco and
Power modes, over-heating protection
Est. pack life to 80% 50,000km
Power pack Ubco 2kW/hr Lithium-Ion
Charger type 50v 350 watt, wall or bench mount
Charge time (standard) 6-8 hours 100% charged
Input Standard 110V or 240V
DRIVETRAIN
Transmission Single Stage Planetary Gear Reduction
CHASSIS / SUSPENSION / BRAKES
Front suspension 36mm ATF forks with adjustable
rebound damping
Rear suspension 32mm ATR shock with adjustable spring
preload and rebound damping
Front suspension travel 90mm
Rear suspension travel 120mm
Brakes Tektro Hydraulic Disk HD-E710,
203 x 2.3mm rotors; pad model D40.11
Tyres Parwin MR098 2.75x17
RANGE
Based on 100% charge, rider only, mixed speed
Eco Mode 70 - 100km
Power Mode 50 - 80km
PERFORMANCE
Max torque 90Nm
Max power 2kW
Top speed 45km/h
WARRANTIES
Frame warranty 3 years
Battery warranty 2 years to 70%
Motor warranties 2 years
Parts / Components 6 months
*Height / Length measures are approximate.
All product specifications are subject to change without notice to improve
performance, function and/or design.
To Next Page
Loading...
Need help?
General
