1312
03
ASSEMBLY
Getting your bike ready to ride is quick and easy, as
long as you follow these simple instructions properly.
We recommend getting a mate to lend a hand.
If you get stuck, contact your service provider.
Box 1:
1. Charger
2. Battery Strap
3. Seat
4. Ubco 2×2 Frame
5. Throttle & Front
Brake Calliper
6. Headlight
7. Handlebars
8. Front Forks
9. Foot Pegs
10. Front Carrier
11. Mud Guard
12. Kick Stands
Not Shown: Fasteners
(attached in place)
Box 2:
• Ubco 2×2 Wheel Assembly
• Fasteners (attached to axles)
Box 3:
Ubco Lithium Ion Battery
Required tools:
22mm Spanner
13mm Spanner
10mm Spanner
5mm Allen Key
4mm Allen Key
3mm Allen Key
*Cable placement is indicative only
To Next Page
Loading...
Need help?
General
