ZED-F9K-Integration manual
High temperature drift and air vents can affect the GNSS performance. For best
performance, avoid high temperature drift and air vents near the receiver.
4.8.3 Package footprint, copper and paste mask
Copper and solder mask dimensioning recommendations for the ZED-F9K module packages are
provided in this section.
These are recommendations only and not specifications. The exact copper, solder and paste
mask geometries, distances, stencil thickness and solder paste volumes must be adapted
to the specific production processes (e.g. soldering etc.) of the customer.
Refer to the ZED-F9K Data sheet [1] for the mechanical dimensions.
4.8.3.1 Footprint
Figure 42: ZED-F9K suggested footprint (i.e. copper mask)
UBX-20046189 - R01
4 Design Page 85 of 105
C1-Public Early production information
To Next Page
Loading...
Need help?
General
