Ublox ZED-F9R Getting Started

ZED-F9R - Application note
UBX-22035176 - R01 Contents Page 10 of 30
C1-Public
Figure 4: Generation 9 configuration view
During the evaluation phase, it is most simple to write the configuration directly to flash. During
development and series production, it is recommended to write the configuration to the RAM or BBR
layer at startup. The host should not write to flash at every startup because of the maximum limit on
the number flash write cycles.

Ublox ZED-F9R Specifications

General

Brand	Ublox
Model	ZED-F9R
Category	Receiver
Language	English