5 | 7 V1.1
2017-07-27
Specifications
Power supply DAS-20PFE-12
EURO-connector, DC-Connector
100-240 V~ 50/60 Hz 0.7 A
Mini-USB 2.0,
Micro-TF Karte: 128 MB ~ 32 GB
Windows/Mac OS/iOS/Android
3.0/4.0 BLE+DER Dual Mode
8.5 V 12 kg x cm,
Speed: 6.5 V 0.238 s/60°,
Overcharging and deep discharge protection
Occupied channel band width
BT3.0: 0.49 mW (-3.14 dBm)
BT4.0: 0.25 mW (-5.94 dBm)
Alpha 1 Pro: 398 x 208 x 122 mm 1650 g
Astrobot Kit: 255 x 65 x 305 mm 850 g
Explorer Kit: 263 x 60 x 350 mm 1000 g
Inventor Kit: 292 x 407 x 82 mm 1650 g
Mini Kit:
304.8 x 65 x 254 mm 1000 g
TankBot Kit: 207 x 65 x 254 mm 750 g
Only Astrobot and Inventor Kit
Only Astrobot and Tankbot Kit
Charging the battery
1. Completely charge the battery of the robot before initial use.
The battery is delivered partly charged.
2. Insert the power plug of the delivered power supply unit into a free and easily accessible socket.
3. Connect the DC-plug of the power supply unit to the DC-jack of the robot.
The battery can be charged in a mounted or unmounted state.
Assembly, Installation and Control
CHOKING HAZARD / RISK OF SUFFOCATION through small parts
- Not suitable for children under the age of 3.
DAMAGE TO PROPERTY
- Make sure cables are properly fixed