Ultimate Ears MEGABLAST User Manual

NOTE: For best results, use the included Ultimate Ears USB cable and power
adapter.
2. Plug the power adapter to the wall, connect the USB cable into the power
adapter, then connect the micro USB connector to the speaker.
3. A white LED next to the micro USB charging port will illuminate and pulse
while the speaker is charging. Once it is fully charged, the LED will be solid
white.
63
Adjust the volume of your speaker
The “+” and “-” buttons of your speaker control the speaker volume:
Press
 “+” to turn up the volume
 “-” to turn down the volume
On Android — the volume control on your device and speaker are independent,
so you adjust the volume on both speaker and device.
On iOS — the volume control on your device and speaker are synchronized, so
adjusting the volume on either your device or speaker will be in sync.
64
Turn your speaker on and off
To turn on your speaker, press the power button (large hash button/LED on top of
the speaker) and wait for the LED to appear indicating the speaker is on. To turn
off, press the same button and wait for the LED to turn off.
You will hear an audible deep drum sound when you turn the speaker on or off.
65
Play local content on your speaker
To play content, you need to be connected to your speaker via Bluetooth. Local
content is not supported over WiFi streaming.

Ultimate Ears MEGABLAST Specifications

General

Brand	Ultimate Ears
Model	MEGABLAST
Category	Speakers
Language	English