#1
#3
#2
#1 #1
Rotate the leg so that the holes
align.
STEP 2 - Support Assembly
Slide all Leg(3) onto the Foot (2) as shown
STEP 3-Top Rail Assembly
B. Now,install the other Ring Element (#1) into the gaps between the Leg (#3) by inserting them into the slots as shown.
Two people will be necessary at this point to assemble the
trampoline. One person lifts the Support Assembly from step 1 to
a standing (vertical) position and inserts one of the sockets of the
Ring Element (#1) into the Leg (#3) portion of the Support
Assembly. The other person holds the other end and inserts that
portion into the other Support Assembly as shown. You should
now have 2 Support Assemblies held together by 1 Ring Element
(#1)
7
To Next Page
Loading...
Need help?
General
