UNI-T UT208 User Manual

F. Duty Cycle Measurement (see figure 8)
To avoid harms to you or damages to the Meter
from eletric shock, do not attempt to measure
voltages higher than 600V AC/DC, although
readings may be obtained.
The duty cycle range is: 0.1%~99.9%.
To measure duty cycle, connect the Meter as follows:
Insert the red test lead into the V Hz terminal
and the black test lead into the COM terminal.
Set the rotary switch to %Hz. Press SELECT to
switch to % measurement mode.
Connect the test leads across with the object
being measured.
The measured value shows on the display.
1.
2.
3.
Red
Black
Warning
Figure 8
Model UT207/208: OPERATING MANUAL
28

UNI-T UT208 Specifications

General

Brand	UNI-T
Model	UT208
Category	Multimeter
Language	English