UNI-T UT212 User Manual

** END **
This operating manual is subject to change without notice.
To replace the battery:
1. Turn the meter power off and remove all the connections from the terminals.
2. Remove the screw from the battery compartment, and separate the battery compartment
from the case bottom.
3. Remove the battery from the battery compartment.
4. Replace the battery with a new 9V battery (NEDA1604, 6F22 or 006P).
5. Rejoin the case bottom and battery compartment, and reinstall the screw.
Model UT212: OPERATING MANUAL
28

UNI-T UT212 Specifications

General

Brand	UNI-T
Model	UT212
Category	Multimeter
Language	English