UNI-T UT527 User Manual

15
4. Overall Result
After the above measurements are completed, the meter will indicate whether
the measured appliance is compliant with the requirements of Cord with
“PASS” or “FAIL”
Checking a mains power supply
The unit comes complete with a built in socket tester which will check to ensure
that the socket is wired correctly.
Connect an IEC lead to the mains socket and plug this into the back of the meter
as in Diagram 6.

UNI-T UT527 Specifications

General

Brand	UNI-T
Model	UT527
Category	Test Equipment
Language	English