UNI-T UT58A User Manual

black red
(figure 3)
Warning
To avoid harms to you or damages to the Meter from
electric shock, please do not attempt to measure
voltages higher than 1000V although readings may
be obtained.
The DC Voltage ranges are: 200mV, 2V, 20V, 200V and
1000V.
The AC Voltage ranges are: 2V, 20V, 200V and 750V
Measurement Operation(1)
A.DC and AC Voltage Measurement (see figure 3)
To measure DC or AC Voltage, connect the Meter as follows:
1. Insert the red test lead into the HzVΩ (UT58C) or
VΩ (UT58A/UT58B) terminal and the black test
lead into the COM input terminal.
2. Set the rotary switch to an appropriate measurement
position in V or V range.
3. Connect the test leads across with the object to be
measured.
The measured value shows on the display.
Model UT58A/B/C: OPERATING MANUAL
14

UNI-T UT58A Specifications

General

Data hold	Yes
Product type	Digital multimeter
AC current range	0.02 - 20 A
AC voltage range	2 - 750 V
DC current range	0.002 - 20 A
DC voltage range	0.2 - 1000 V
Capacitance range	2 - 100000 nF
Basic accuracy (DC current)	±(0.8%+1)
Basic accuracy (DC voltage)	±(0.5%+1)
Basic accuracy (capacitance)	±(4%+3)
Battery voltage	9 V
Dimensions (WxDxH)	88 x 39 x 179 mm

Weight and Dimensions

Weight	350 g