UNI-T UT58A User Manual

To replace the Meter’s fuse:
1. Turn the Meter off and remove all connections from
the terminals.
2. Remove the holster from the Meter.
3. Remove the 3 screws from the case bottom, and
separate the case top from the case bottom.
4. Remove the fuse by gently prying one end loose,
then take out the fuse from its bracket.
5. Install ONLY replacement fuses with the identical type
and specification and make sure the fuse is fixed
firmly in the bracket.
Fuse: 0.5A, 250V, fast type,φ5x20mm
6. Rejoin the case bottom and case top, and reinstall
the 3 screws and holster.
Replacement of the fuses is seldom required. Burning
of a fuse always results from improper operation.
** END **
This operating manual is subject to change without notice.
Model UT58A/B/C: OPERATING MANUAL
34

UNI-T UT58A Specifications

General

Data hold	Yes
Product type	Digital multimeter
AC current range	0.02 - 20 A
AC voltage range	2 - 750 V
DC current range	0.002 - 20 A
DC voltage range	0.2 - 1000 V
Capacitance range	2 - 100000 nF
Basic accuracy (DC current)	±(0.8%+1)
Basic accuracy (DC voltage)	±(0.5%+1)
Basic accuracy (capacitance)	±(4%+3)
Battery voltage	9 V
Dimensions (WxDxH)	88 x 39 x 179 mm

Weight and Dimensions

Weight	350 g