Model UT60H: OPERATING MANUAL
38
MAINTENANCE(1)
This section provides basic maintenance information
including battery and fuse replacement instruction.
Warning
Do not attempt to repair or service your Meter unless
you are qualified to do so and have the relevant
calibration, performance test, and service information.
A. General Service
l Periodically wipe the case with a damp cloth and
mild detergent. Do not use abrasives or solvents.
l To clean the terminals with cotton bar with detergent,
as dirt or moisture in the terminals can affect readings.
l Turn the Meter power off when it is not in use.
l Take out the battery when it is not using for a long time.
l Do not use or store the Meter in a place of humidity,
high temperature, explosive, inflammable and strong
magnetic field.
B. Replacing the Fuses (see figure 12)
Rubber foot
Screw
( figure 12)
To Next Page
Loading...
Need help?
General
