Model UT60H: OPERATING MANUAL
40
MAINTENANCE(3)
Warning
To avoid false readings, which could lead to possible
electric shock or personal injury, replace the battery
as soon as the battery indicator “ ” appears.
Make sure the test leads are disconnected from the
circuit being tested before opening the case bottom.
To replace the battery:
l Press the POWER to turn the Meter off and remove
all connections from the terminals.
l Remove the screw from the battery compartment,
and separate the battery compartment from the case
bottom.
l Remove the battery from the battery compartment.
l Replace with a new 6F22 9V battery .
l Rejoin the case bottom and battery compartment,
and reinstall the screw.
** END **
This operating manual is subject to change without notice.
To Next Page
Loading...
Need help?
General
