UNI-T UT90A User Manual

33
3. Remove the 3 screws from the case bottom, and
separate the case top from the case bottom.
4. Remove the battery from the battery connector.
5. Replace with a new 9V battery (NEDA1604, 6F22 or
006P).
6. Rejoin the case bottom and case top, and reinstall
the 3 screws and the holster.
** END **
This operating manual is subject to change without notice.
Model UT90A: OPERATING MANUAL

UNI-T UT90A Specifications

General

Brand	UNI-T
Model	UT90A
Category	Multimeter
Language	English